High Precision Bar To Bar Peeling Machine:
The middle of the Bar Peeling Machine is empty and there is a knife around the plate. We will process materials here. Fix, and then adjust the tilt angle of the cutter, the cutter begins to spin at high speed. During processing, the bar itself doesn't rotate. The cutter head drives the tools rotating at high speed to pell the surface of the bar. At the same time, after peeling, the bar keeps walking straight ahead. The machine suits for processing the bars and wire rods.
A steel peeling machine removes the decarburized layer, scratches, or defective hardened layer on the surface of the cold/hot rolled round material. A continuous feed system of bars loses no time in loading and unloading. Therefore, it is suitable for mass production.
|Main power source||AC 380V 50HZ||AC 380V 50HZ||AC 380V 50HZ||AC 380V 50HZ||AC 380V 50HZ|
|Control source||AC 220V 50HZ||AC 220V 50HZ||AC 220V 50HZ||AC 220V 50HZ||AC 220V 50HZ|
|System control power||DC24V||DC24V||DC24V||DC24V||DC24V|
|Hardness||hot rolled material ≤HB310||hot rolled material ≤HB310||hot rolled material ≤HB310||hot rolled material ≤HB310||hot rolled material ≤HB310|
|Peeling diameter range size (raw material)||∮11-41mm||∮21-85mm||∮31-102mm||∮71-155mm||∮92-255mm|
|Peeling diameter range size (finished product)||∮8-40mm||∮20-80mm||∮30-100mm||∮70-150mm||∮90-250mm|
|Yield Strength||1200 MPa||1200 MPa||1200 MPa||1200 MPa||1200 MPa|
|The knife dish form||four knife||four knife||four knife||four knife||four knife|
|Blade adjustment mode||Adjust the cutter online without stopping||Adjust the cutter online without stopping||Adjust the cutter online without stopping||Adjust the cutter online without stopping||Adjust the cutter online without stopping|
|Speed of mainshaft||300-2000r/min||300-1000r/min||300-1000r/min||200-450r/min||70-260r/min|
|Feeding speed||0.5-12m/ min||0.5-10m/ min||0.5-8m/ min||0.5-5m/ min||0.5-4m/min|
|Out of roundness||≤0.05||≤0.05||≤0.05||≤0.05||≤0.05|
|Straightness (raw material)||≦3‰||≤3‰||≤3‰||≤3‰||≤3‰|
|Straightness (finished product)||≦3‰||≤3‰||≤3‰||≤3‰||≤3‰|
|Loading frame and unloading frame's length (standard configuration)||6m||6m||6m||6m||6m|
|Main motor power||37KW||55KW||55KW||90KW||75KW|
|Feed motor power||3.0KW*2||3.0KW*2||3.0KW*2||3.0KW*3||3.0KW*6|
|Pull out motor power||3.0KW*3||3.0KW*3||3.0KW*3||3.0KW*3||3.0KW*4|
|Hydraulic pressure station motor power||3.0KW*1||3.0KW*1||3.0KW*1||11KW*1||11KW*1|
|chip removal device motor pwer||0.75KW*1||0.75KW*1||0.75KW*1||0.75KW*1||0.75KW*1|
|Motor power of the shrink knife||0.4KW*1||0.4KW*1||0.4KW*1||0.4KW*1||0.4KW*1|
|Motor power of upper and lower roller table||1.1KW*1||1.1KW*1||1.1KW*1||1.1KW*1||1.1KW*1|
|boundary dimension (m)||16.5*3.2*1.9||16.5*4*1.9||16.5*4*1.9||18*4*2.1||20*4.5*2.4|
1. High Quality
With reference to German technology, on this basis, we update and improve our technology, compared with foreign equipment, our equipment has high quality, high efficiency, simple operation, convenient maintenance, low failure rate, low energy consumption and reasonable price.
2. Enough experience and High technology
We start from the processing industry, using self-made equipment to undertake the national bar material processing business. This is also an important basis in which we can continuously improve our equipment technology. Because we have processed different materials and specifications bar materials, we have more practical experience to suggest. Therefore, we all have better and more accurate judgment and guidance on the possible faults and operational errors of the equipment.
3. on-line tool adjustment without stopping
Compared with similar products in China, our peeling machine can make on-line tool adjustment without stopping. And we equipped with good quality accessories.
After-sale Service Services
1. Free quality guarantee period for 12 months
2. Free long-term technical support
3. Free train for buyer's operator in our factory
4. Fast response service within 24 hours
5. Our engineers can offer overseas services, including guiding installation, commissioning, training, etc.